Duren 625627 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Duren 625627. Duren 625627 8 pagina's. Air operated 75mm palm sander

PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE

It is strongly advised that you always use a Whip Hose/Leader Hose in combination with

Quick Release Couplings. See Fig. 2 for recommended setup.

Water in the air supply will cause the internal bearing of the tool to rust and eventually

seize.

Make sure that your airline is free from water at all times.

Always select the correct sanding disc grit for the job.

Tools Included with your Sander

1 x High Flow Male Air Fitting

Maintenance

If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool

directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil

into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe

usage. These can be obtained from your supplier.

Replace worn or damaged parts using genuine parts only.

Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet

conditions.

Duren Tools

T: 01582 484875 E: [email protected]