AddSecure Edge VS5010 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AddSecure Edge VS5010. AddSecure Edge VS5010 10 pagina's. Connect intercom
Ook voor AddSecure Edge VS5010: Gebruikershandleiding (14 pagina's)
Pagina afdrukken
11 Specifications
Section
Ethernet
Standard
Connection
IP addressing
Fault detection
Wi-Fi
Standard
Connection
Fault detection
4G/3G/2G
Frequencies
Connection
Fault detection
IP
TCP ports (outbound)
Alarm transmission interfaces
Interface to ARC
Dial capture interface to voice
panel
Serial interfaces
PIN Inputs interface
Relay outputs
Maximum operating voltage
Maximum current rating
Local configuration
Bluetooth
USB
Power supply
Supply voltage
Typical current (no DC outputs)
Maximum current (no DC outputs)
Recommended external PSU (with
DC power outputs)
DC power outputs
page 8
Details
10/100 Base T with auto-negotiation, up to 100m
RJ45 socket for CAT5 cabling
Dynamic (DHCP) or fixed
Loss of Ethernet synchronisation
IEEE 802.11 b/g/n
2.4GHz b/g/n with internal PCBA chip antenna
Loss of association/data
Penta band LTE (4G)
800/900/1800 MHz
2100/2600 MHz
Dual band UMTS (3G)
900/2100 MHz
Dual band GSM (2G)
900/1800 MHz
MMCX socket for antenna, 2
Loss of registration with network
53165 (Alarms & Polling), 51292 (Diagnostic & Reflashing),
10001 (Upload/Download)
AddSecure Connect
Two-wire interface via terminal block.
RS485, TTL (max 3 metres), RS232 (max 3 metres)
Maximum input voltage range 0V to +28V DC (max 3 metres)
Input "low" (alarm) threshold < 1V
Input "high" (restore) threshold > 2V
Internal pull-up impedance 10K to 3.3V supply
24V DC
100mA DC
Dual mode Bluetooth 4.0
Micro USB device, for use with IRIS Toolbox
10.5V to 28V DC
200mA @ 12V DC (not charging), 500mA @12V DC (charging)
1A @ 12V DC
15V DC 2A 30 Watt.
Note: To comply with the Radio Equipment Directive,
2014/53/EU.
PDK-15088-v.2.0 Connect Intercom User Manual.docx
nd
RX antenna socket for diversity