Durite 0-776-09 Instructies

Blader online of download pdf Instructies voor {categorie_naam} Durite 0-776-09. Durite 0-776-09 2 pagina's. Side mount infra-red colour cctv camera 720p ahd high definition

Pagina afdrukken

Side Mount Infra-Red Colour CCTV Camera

720P AHD High Definition.

Part No. 0-776-09

WARNINGS

Before using this unit please read these instructions carefully. Take special care to follow

the warnings and safety suggestions listed below. Keep these instructions for future refer-

ence.

There are no user-serviceable parts within the unit, refer servicing to qualified service

personnel.

PRECAUTIONS

• Please ensure you are familiar and comply with local traffic and driving regulations.

• Connection - The camera should only be connected to a Durite cctv system.

• Heat - Do not install the camera near heat sources.

• Mounting - Ensure the camera is facing the desired direction before fixing the camera

base. If fixing to isolated return chassis the camera bracket should be isolated from the

vehicle chassis.

• Service - The user should not attempt to service these units beyond that described in these

instructions. All other servicing should be referred to an authorised service technician.

GENERAL

The camera has a CMOS image sensor which gives a high quality picture and its solid state

circuitry provides extremely long life. Compact size and single connection make it easy

to install. Automatic gain control (AGC) provides a clear image in both strong sunlight

and low light conditions, if lighting conditions fall below a set level the Infra-red LEDs will

illuminate.It is recommended that all camera lead connections are additionally sealed by ei-

ther wrapping with a suitable tape or application of heat shrink sleeving. It is recommend to

connect the system and test before fixing to ensure the correct field of view is displayed.

0-776-09-LEAF