AppconWireless RF1276 Series Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} AppconWireless RF1276 Series. AppconWireless RF1276 Series 16 pagina's. Lora module

Firstly users connect converter board to PC through DB9 cable and open 'RF Tool', then insert module

into converter board. After that, the status column of 'RF tool' will give a indication 'Found Device'. Users

then can read/write the module.

If users connect USB converter, USB drive ''PL-2303_Driver_Installer''need be installed firstly. The

drive has different version for different OS. USB converter has five wires with five different colors: Black,

Red, Blue, Yellow. Black wire is GND pin. Red wire is VCC pin. Blue wire is TXD pin.

♦ Setting in circuit . Users also can use microcontroller to change the default parameters. The work

mechanism is the same as in PC.

Sync word

0xAF 0xAF

Notes: 1. The ID code is 0x00 0x00 in command.

RF1276

Figure 4: The connection diagram

ID code

Header

0x00

0XAF

RF1276 Command Structure

- 8 -

LoRa module

Command

Length

LEN

V3.0

Data

CRC

End code

XXXX

0X0D 0X0A

2018-2-12