Acer AT2620A Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acer AT2620A. Acer AT2620A 24 pagina's. Acer lcd tv user's guide

Pagina afdrukken

Important safety instructions

Read these instructions carefully. Please put them somewhere safe for

future reference.

Follow all warnings and instructions marked on the product.

Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. The

product may fall, sustaining serious damage.

Slots and openings are provided for ventilation; to ensure reliable

operation of the product and to protect it from overheating,

these openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed, sofa,

rug or other similar surface. This product should never be placed

near or over a radiator or heat register or in a built-in installation

unless proper ventilation is provided.

This product should be operated from the type of power

indicated on the marking label. If you are not sure of the type of

power available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate

this product where the cord will be stepped on.

If an extension cord is used with this product, make sure that the

total ampere rating of the equipment plugged into the extension

cord does not exceed the extension cord ampere rating. Also,

make sure that the total rating of all products plugged into the

wall outlet does not exceed the fuse rating.

Never push objects of any kind into this product through cabinet

slots as they may touch dangerous voltage points or short-out

parts, which could result in a fire or electric shock. Never spill

liquid of any kind on the product.

10 Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or

other risks. Refer all servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions.Improper adjustment

of other controls could result in damage; extensive work by

a qualified technician might then be required to restore the

product to normal condition.

e. If the product has been dropped or the case has been

damaged.

f. If the product exhibits a distinct change in performance,

indicating a need for service.

12 Use only the proper type of power supply cord set (provided in

your accessories box) for this unit. Always disconnect the power

cord from the wall outlet before servicing or disassembling this

equipment.

13. Do not overload an electrical AC outlet, power strip, or

convenience receptical. The overall system load must not exceed

80% of the branch circuit rating. If power strips are used, the load

should not exceed 80% of the power strip input rating.

14 Some products are equipped with a three-wire electrical

grounding-type plug that has a third pin for grounding. This plug

only fits into a grounded electrical outlet. This is a safety feature.

Make sure the AC outlet is properly grounded. Do not defeat the

safety purpose of the grounding-type plug by trying to insert it

into a non-grounded outlet. If you cannot insert the plug into the

outlet, contact your electrician to replace the obsolete outlet.

Acer.TV.US.indb 3

The grounding pin is an important safety feature. It is possible

to receive an electric shock from a system that is not properly

grounded

The grounding pin is also providing good immunity ability against

unexpected noise that interferes performance of this product and is

produced by other nearby electrical devices.

Disposal instructions

Do not throw this electronic device into the trash when discarding.

To minimize pollution and ensure utmost protection of the global

environment, please recycle.

For more information regarding WEEE, please refer to

http://global.acer.com/about/environmental.htm

USA

For electronic products containing an LCD/CRT monitor or display:

Lamp(s) inside this product contain mercury and must

be recycled or disposed of according to local, state or

federal laws. For more information, contact the Electronic

Industries Alliance at www.eiae.org. For lamp-specific

disposal information, check www.lamprecycle.org.

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

However, there is no guarantee that interference will not occur in a

particular installation. If this device does cause harmful interference

to radio or television reception, which can be determined by turning

the device off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the device and receiver.

•

Connect the device into an outlet on a circuit different from that

to which the receiver is connected.

•

Consult the dealer or an experienced radio/television technician

for help.

Notice: Shielded cables

All connections to other computing devices must be made using

shielded cables to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.)

certified to comply with the Class B limits may be attached to this

equipment. Operation with non-certified peripherals is likely to result

in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer

could void the user's authority, which is granted by the Federal

Communications Commission, to operate this computer.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme

NMB-003 du Canada.

LCD pixel statement

The LCD unit is produced with high-precision manufacturing

techniques. Nevertheless, some pixels may occasionally misfire or

appear as black or red dots. This has no effect on the recorded image

and does not constitute a malfunction.

6/22/2006 11:25:00 AM