Data Harvest 1207 Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Data Harvest 1207. Data Harvest 1207 20 pagina's. Wireless uv sensor

Green flashing

Solid Green

Orange flashing

Red flashing

On/Off Switch (3)

The sensor's on/off switch allows you to turn the sensor on, off or perform a hard reset.

To switch the sensor off

· Press and hold down the On/Off switch until the white light shows, then release.

· If not communicating with the EasySense2 app, the sensor will turn off after a period of one hour of

inactivity.

Hard resetting the sensor

· If necessary, attach the sensor to power.

· Press and hold down the On/Off button for at least 8 seconds until the status LED gives a flash of

blue light, then release.

· If the sensor fails to respond, contact Product Support at Data Harvest. Please provide details of: 

The computer platform it is being used with and the EasySense2 app's version number.

A description of the problem being encountered.

USB Port (4)

Use to connect to a computer or a charging unit.

For specific USB or Bluetooth connectivity instructions, please see the 'Connectivity' section of this

documentation.

For instructions on charging your device, see the section on 'Charging the Sensor'.

Unique ID Number (5)

All Smart Wireless Sensors are labelled with a unique ID number. This number is used in the

EasySense2 app, so that you can identify each sensor when making a connection wirelessly.

Communication with the EasySense2 app (via USB or

Bluetooth) has been established

Fully charged

Recording data

Battery is low

7 / 20 | Revision: 0 | DS182

1207 – Wireless UV Sensor