DURKOPP ADLER 581 Extra instructies - Pagina 9

Blader online of download pdf Extra instructies voor {categorie_naam} DURKOPP ADLER 581. DURKOPP ADLER 581 12 pagina's. Fitting the sewing lamp

Fitting the sewing lamp

2.2 Fitting the housing with printed circuit board

Step

1. Place the housing (1) with preassembled printed circuit board under

Fig. 5: Housing with printed circuit board

①

②

(1) - Housing

2. Connect the X411 cable (3) to the tab connector of the printed circuit

Fig. 6: Connecting the cable

③

(3) - X411 cable

3. Secure the housing with the 3 screws ( 2.1 Removing components,

Additional Instructions 581 - 00.0 - 02/2015

the sewing head.

board (2).

pg. 5).

(2) - Printed circuit board