Addspace 002 0581 Series Montagehandleiding - Pagina 6

Blader online of download pdf Montagehandleiding voor {categorie_naam} Addspace 002 0581 Series. Addspace 002 0581 Series 6 pagina's. 4 drawer chest

STEP 7

LIFT UNIT UP AND LOCATE DRAWERS AND COVER CAPS

INSERT DRAWERS ON

TO RUNNERS ALREADY

IN PLACE ON PANELS

5519 AND 5520's.

PLACE PLASTIC DRAWER

STOPS FROM THE INSIDE

OF THE DRAWER THROUGH

THE HOLE AT THE BACK

OF THE WRAP WHEN

THE DRAWER

IS IN PLACE.

REPEAT THE ABOVE

ON THE 3 REMAINING

DRAWERS.

COVER ANY EXPOSED

SCREW HEADS

USING FITTING PP.

MAINTENANCE AND USE INTRUCTIONS

To protect the furniture, position the furniture out of direct sunlight and away from direct

heat sources such as radiators and fires.

Do not place the furniture in excessively dry or humid conditions.

Clean spills up immediately.

Always lift the furniture when moving it(do not drag) otherwise the joints may be damaged.

Do not place hot or cold objects on the surface, always use protective mats to avoid marking

the furniture.

The colour of the furniture will mellow with time; it is advisable to move the objects

periodically, to keep a more even colour.

Do not use a silicone based polish to clean the furniture,as they may harm the surface finish

and strength of the joints.

Check that all assembly fittings are tight on a regular basis.

Cleaning instructions

Dust surfaces with a soft, dry, lint free cloth.

More stubborn marks can be removed using a damp (not wet) cloth. Wipe the surface dry

immediately using a soft lint free cloth.

Do not use detergants, abrasive cleaning products or cleaning products that contain

ammonia, solvents or silicone as these may damage the surface finish.

Fittings you will need in this step:

(x4)

(x8)

CONGRATULATIONS YOUR UNIT IS COMPLETE

PAGE 6