Data Video TLM-702HD Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Data Video TLM-702HD. Data Video TLM-702HD 12 pagina's. 2 x 7" tft lcd monitor
Ook voor Data Video TLM-702HD: Gebruiksaanwijzing (11 pagina's)

Pagina afdrukken
NB: OSD Blending value 0 = Min transparency 7 = Max transparency
- Press the
ENTER
- Press the
or
UP
- Press the
ENTER
- Press the
or
UP
NB: TC Position is used to set where on the monitor Time Code will be shown.
- Press the
ENTER
(Left/Up, Middle/Down, Right/Down, Right/Up)
- Press the
or
UP
- Press
button to cycle through the possible HD time code lines (8~20).
ENTER
- Press the
or
UP
- Press
button to cycle through the possible SD time code lines (10~21).
ENTER
- Press the
or
UP
- Press
button to cycle through the possible time code font sizes on the screen
ENTER
(Large or Small).
- Keep pressing the
- Press the
SOURCE

5. Advance

- Press the
MENU
- Press the
ENTER
NB: The LCD L/R Scan will reverse the image displayed horizontally.
- Press the
ENTER
- Press the
ENTER
- Press
/
UP
DOWN
NB: The LCD U/D Scan will reverse the image displayed vertically.
- Press the
ENTER
- Press the
ENTER
- Press
/
UP
DOWN
NB: This option will return the monitor to the factory default settings.
- Press the
ENTER
- Press
/
UP
DOWN
- Press the
ENTER
- Keep pressing the
- Press the
SOURCE
button to save the OSD blending value.
button to highlight the Time Code setting.
DOWN
button to toggle the on screen Time Code display ON/OFF.
button to highlight the TC Position setting.
DOWN
button to cycle through the possible Time Code Positions on the monitor
button to highlight the TC HD Line setting.
DOWN
button to highlight the TC SD Line setting.
DOWN
button to highlight the TC Font Size setting.
DOWN
button to cycle through the main menu options.
MENU
button to exit the menu mode.
button five times to display the Advance setting menu.
button to highlight the LCD L/R Scan setting.
button, the screen image will be reversed (Left to Right).
button again, the screen image will return to normal view.
button to highlight the LCD U/D Scan setting.
button, the screen image will be reversed (Top to Bottom).
button again, the screen image will return to normal view.
button to highlight the Reset option.
button to re-start the monitor with the factory default settings.
button to highlight the Version setting.
button, the firmware version will be displayed on screen.
button to cycle through the main menu options.
MENU
button to exit the menu mode.
9