DUROFIX RZ4012 Informatie handleiding - Pagina 5

Blader online of download pdf Informatie handleiding voor {categorie_naam} DUROFIX RZ4012. DUROFIX RZ4012 17 pagina's. Oil pulse tool

c. Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the

tool. Carrying power tools with your finger on the switch or energising power

tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of these devices

can reduce dust-related hazards.

h. Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause

severe injury within a fraction of a second.

WARNING

a. Use clamps or other practical way to secure and support the workpiece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

b. Do not force tool. Use the correct tool for your application. The correct tool

will do the job better and safer at the rate for which it is designed.

c. Do not use tool if switch does not turn it on or off. A tool that cannot be

controlled with the switch is dangerous and must be repaired.

d. Disconnect battery pack from tool or place the switch in the locked or off

position before making any adjustments, changing accessories, or storing the

tool.

Such preventive safety measures reduce the risk of starting the tool

accidentally.

e. Store idle tools out of reach of children and other untrained persons. Tools

are dangerous in the hands of untrained users.

f. Maintain power tools and accessories. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that may affect the

power tool's operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

g. Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

h. Use the power tool, accessories and tool bits etc. in accordance with these

TOOL USE AND CARE