Data-Linc Group FLC910E Snel aan de slag - Pagina 2
Blader online of download pdf Snel aan de slag voor {categorie_naam} Data-Linc Group FLC910E. Data-Linc Group FLC910E 4 pagina's. Fastlinc 905-925 mhz ofdm industrial ethernet radio modem
Pagina afdrukkenFLC910E Quick Start Guide
Setup PC for Configuration
Configure the PC TCP/IP settings to match the network for the FLC910E to be configured. (Set the PC to a static
IP Address of 192.168.1.X, where X can be from 2 to 254, and set a Subnet Mask of 255.255.255.0)
Default FLC910E Settings
IP Address
User Name
Password
Mode
ESSID
Security
Wireless Device
Name
Channel /
Frequency
Bandwidth
Configuring the FLC910E
•Start a web browser client such as Internet Explorer© (6.0 or greater) or Mozilla Firefox©.
•In the address bar type: "http://192.168.1.1" to access the web based configuration.
Accept the "Security Alert" or "I Understand the Risks" and "Confirm Security Exception".
Note: To return the FLC910E to the default configuration and password, after the unit has fully booted, press and
hold the reset button for 5 seconds until the Status LED begins to flash quickly. This will reboot and reset the unit
to default configuration.
•Login into the unit using the default
User Name: (admin) and Password: (password).
The "About" page is the displayed page after logging in. On the left margin are the settings and features for
monitoring and configuration of the unit.
Note: For a basic system to operate, one (1) "Base Station" and one or more "Station Adaptors" are needed).
192.168.1.1
admin
password
Base Station
Wireless
None Set
DEVICExxxxxx
(xxxxxx = Last 6 digits of MAC Address)
CH 3 / 918 MHz
5 MHz
Example PC Settings for Configuration:
PN 161-09855-001A
June 2010