Data-Tronix DT-ATSC-IP-8 Gebruikershandleiding & Installatiehandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding & Installatiehandleiding voor {categorie_naam} Data-Tronix DT-ATSC-IP-8. Data-Tronix DT-ATSC-IP-8 15 pagina's. 8 input atsc/qam to ip processor

Pagina afdrukken
Login
Once the Encoder Setup Tab is selected you will be prompted to enter the user name and password for device.
GUI Login Password:
Default User Name: admin
Default Password: Admin123
Note: To change the Password for the GUI go to the Administration Tab

RF Setup

2.
Use the RF Setup Tab to configure each RF Input.
Up to eight (8) RF signals can be assigned.
◊ Select RF Setup Tab.
◊ Enter the appropriate RF parameters for each RF signal.
ᄋ Mode: Manual/Disabled (Default Setting: Manual).
ᄋ Standard: Select ATSC / J.83B (QAM-B).
ᄋ Constellation: Select and Set the appropriate Constellation.
NACE:
610-429-1511
| [email protected] | www.datatronix.biz | | DT-ATSC-IP-8 Manual v1.0
Page 8