4IPNET EAP200 Snelle installatiehandleiding - Pagina 8

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} 4IPNET EAP200. 4IPNET EAP200 15 pagina's. Enterprise access point

Hardware Installation

Please follow the steps mentioned below to install the hardware of EAP200:

1. Place the EAP200 at a best location.

The best location for EAP200 is usually at the center of your wireless network.

2. Connect EAP200 to your network device.

Connect one end of the Ethernet cable to the LAN port of EAP200 and the other end of the cable to a

switch, a router or a hub. EAP200 is then connected to your existing wired LAN network.

3. There are two ways to supply power over to EAP200.

(a) Connect the DC power adapter to the EAP200 power socket.

Please only use the power adapter supplied with the EAP200 package. Using a different power

adapter may damage this system.

(b) EAP200 LAN port is capable of transmitting DC currents. Connect an IEEE 802.3af-compliant PSE

device, e.g. a PoE-switch, to the LAN port of EAP200 by the Ethernet cable.

Now, the Hardware Installation is completed.

To double verify the wired connection between EAP200 and your switch/router/hub, please

check the LED status indication of these network devices.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

EAP200 Enterprise Access Point

Quick Installation Guide

ENGLISH