Durst M 670 COLOR Bedieningshandleiding - Pagina 15

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Durst M 670 COLOR. Durst M 670 COLOR 16 pagina's.

Pagina afdrukken

To do this, first remove the standard red filter holder by

unscrewing with a screw driver, then fit the 6

7 cm red filter

holder on the lens carrier with the milled screw

(46) supplied.

Black-and-white conversion kit for enlarging 6 X 6 cm films with

the Ourst M

670 BW

A conversion kit (Order code VEGASET 66) is available

separately for enlarging

6 X 6 cm (21/4 X 21/4 in.) films with

the Durst M

670 BW. The kit consists of:

- Condenser for 6

6 cm films

- Upper negative carrier glass with anti-Newton coating

- Glassless mask for 6

6 cm film.

With this conversion kit you can enlarge 6

6 cm films using

an anti-Newton coated glass in the top and a glassless

format mask in the bottom of the negative carrier.

If you have the VEGASET

66 conversion kit for 6 X 6 cm films

and plan to enlarge also

4.5x6 and 6x7 cm films you need

the further accessories listed in the system chart on page

15.

Colour conversion kit for enlarging 6 X 7 cm films with the

Ourst M

670 COlOR

A special conversion kit (Order code VEGACOlSET

67)

is available separately to convert the basic Durst M

670 COlOR

enlarger to handle 6

7 cm films. It consists of:

- Mixing box for

6x6 and 6x7 cm films

- Upper negative carrier glass with anti-Newton coating

- lower glassless format masks for 6 X 7 cm films

- lens tube to fit

100/105 mm lenses

- Extensive arm for diffuser holder.

With this conversion kit you can enlarge 6 X 7 cm films with

an anti-Newton coated glass on the top of the negative carrier

and a glassless format mask in the bottom.

If you have the VEGACOlSET

67 conversion kit for 6 X 7 cm

films and plan to enlarge also

4.5x6 and 6X6 cm (1

/4X2 1 /4

and

21/4 X 21/4 in.) films, you need the accessories listed in the

system chart on page

15.

NOTE: Insert the VEGATUB

39 lens tube into the lens carrier

so as to bring the lens nearer to the projection plane.

To use the red filter (and diffuser) replace the standard red

filter holder by the 6

X 7 cm red filter holder (45). To do this,

first remove the standard red filter holder with a screw

driver and then fix the 6

7 cm red filter holder on the lens

carrier with the milled screw

(46) supplied.

Colour conversion kit for enlarging 6 X 7 cm films with the

Ourst M

670 COlOR

A special conversion kit (Order code VEGACOlSET 66) is

available separately to convert the basic Durst M

670 COlOR

to enlarge 6

6 cm films. It consists of:

- Mixing box for

6 X 6 and 6 X 7 cm films

- Upper negative carrier glass with anti-Newton coating

- lower glassless format masks for 6

6 cm films.

With this conversion kit you can enlarge 6

6 cm with an

anti-Newton coated glass in the top and a glassless format

mask in the bottom of the negative carrier.

If you have a VEGACOlSET

66 kit for 6 X 6 cm films and plan

to enlarge also

4.5 X 6 and 6 X 7 cm films, you will need the

accessories listed in the system chart on page

15.

Accessories for film sizes smaller than 24

36 mm

The following accessories are available separately for enlarging

films smaller than

24X36 mm with the basic Durst M 670 BW

or M

670 COlOR enlarger:

- A pair of SIVOPAR

26 masks for 26X26 mm films

- A pair of SIVOPAR

18 masks for 18X24 mm films

- A pair of SIVOPAR

110 masks for enlarging 13x17 mm films

- A SIRIOTUB

39 lens tube to take a 35 mm lens.