Dataforth PWRM10-01 Snelstarthandleiding - Pagina 14
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dataforth PWRM10-01. Dataforth PWRM10-01 20 pagina's. Iot energy monitoring modules
Pagina afdrukken
MA1069 PWRM10-01 & PWRM20-01 Quick Start Guide
Modules are factory configured as follows:
Static IP Address
Subnet Mask
Gateway
DNS Server
The Discovery Tool will find multiple modules connected to a network with the same static IP address.
For proper operation, assign each module a unique IP address or change the configuration to DHCP.
To change the settings, hover over a module Device Name in the list and right click to open the
configure network menu.
Figure 11: Change IP Parameters
Click Change IP Parameters, then enter the desired static IP address parameters or select DHCP to
allow a network controller to automatically assign an IP address.
To push network configuration changes to the module, press the OK button.
To apply the new network settings, power cycle the module or right click the module again and select
Reset Device. The module will be removed from the list and reappear when a connection is
established using the new parameters.
Page 10 of 16
192.168.128.100
255.255.255.0
127.0.0.1
8.8.8.8
Figure 12: Configure IP Parameters