Elsema Gigalink GLR2702 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Elsema Gigalink GLR2702. Elsema Gigalink GLR2702 8 pagina's. 2-channel 27mhz receiver

Technical Data

Supply Voltage

Current Consumption

Receiving Frequency 27.195MHz

Operating Temperature

Sensitivity 1uV (for output to activate)

Decoding System Microcontroller based 96-bit word

Code Combinations 4,294,967,296

Outputs Two change over relay outputs, rated at 8 Amps/240 Volts

Connections Supply, Antenna & Outputs: Screw type terminal block

Antenna

Dimensions 96 x 70 x 20mm

Mounting Hole Size 3.97mm or 5/32"

Weight 83g

Microcontroller Can be re-programmed to suit your customised needs

Useable Transmitters All Elsema Type 27MHz GLT-... series

Useable Operating Range

11.0 to 28 VDC and 10.0 to 28 VAC.

Can use Elsema AC power pack (PP12 or PP24).

Supply lines should be less than 3 metres long to comply with radio frequency

authorities.

14mA standby at 12 VDC Supply

63mA if relay "ON" at 12 VDC Supply

-5 to 50°C

Range

50 ohms, 27MHz CB-Antenna or approximately 1m long & 1mm thick piece

of wire

Up to 350m with proper 50 ohms, 27MHz CB-Antenna. Up to 200m with 1m

long antenna wire. Antenna wire should be extended and away from metal.

Ranges assume line-of-sight operation.

2-Channel 27MHz GIGALINK™ Receiver with relay outputs, GLR2702

- 3 -

ELSEMA