Elsema PentaTimer PCR43302240T Handmatig
Blader online of download pdf Handmatig voor {categorie_naam} Elsema PentaTimer PCR43302240T. Elsema PentaTimer PCR43302240T 7 pagina's. Two channels, 433mhz penta receiver with time clock functions
Pagina afdrukken
Two Channels, 433MHz Penta Receiver with Time Clock Functions
Features
Supply voltage 240VAC (also available in 110-120VAC
supply for international markets)
Din rail mountable case
Two optically isolated inputs for manual control
Time clock with automatic daylight saving control
Antenna diversity for robust link with extended range
Unlimited remotes can be programmed to the receiver
Compatible with PentaFOB® and PentaCODE® remotes
Momentary, latching and timer modes are user selectable
On-board diagnostic LED's to indicate correct power,
reception and relay activation
Applications
Automatic 24 hour time clock switching on and off
Automatically open and close gates with a time clock
Home automation i.e. garden lights, swimming pool control etc
Security lighting
.... and anywhere else you need a time clock or wireless signal to
activate a contact closure
Description
Powered by top-grade components and technologies, the
clock that can store 50 programs. It can be programmed to switch "on" and "off" each of its relays based on a
time clock, isolated inputs or with the PentaFOB®" and "PentaCODE® remote controls.
The time clock is powered by its own lithium battery and therefore does not lose the time and programs when
the receiver is disconnected from the supply.
With features such as 240VAC supply connection, receiver frequency hopping, unlimited remote storage, din
rail mountable case and automatic daylight saving adjustment, this receiver makes it easy to install wireless
switching functions with time clock controls.
Output Modes
Relay output modes on the receiver are user selectable. By default the mode is set to momentary.
Factory Default = Momentary
Momentary
- Output is "on" for as long as any of the inputs are held active.
Latching
- Output remains "on" until next input is activated.
Similar to switching "on" and "off" a light.
On Time
- Once activated, the relay remains "on" for the set time. Adjustable from 1 - 600sec.
Each relay can be adjusted independently.
Timer
- Each relay can be switched "on" and "off" based on real time clock.
Function
For example: Switch "on" lights at 8pm and "off" at 6am weekdays only.
PentaTimer Receiver
PentaTimer receiver has a built-in 24 hour 7 day time
ELSEMA
2 Channel, Penta Receiver with Time Clock
PCR43302240T