Cayin CS-300A Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cayin CS-300A. Cayin CS-300A 16 pagina's. Vacuum tube integrated amplifier
Pagina afdrukken
Front Panel
POWER
ON
1
1. Power On/Off: Turn on and off the amplifier.
Press "down" the button to turn on the amplifier,
Press again the button will resume to original
position and the amplifier will power off.
2. Power Indicator: Indicate the working status: The
indicator will remain always on when the amplifier is
in regular operation
3.
PHONES
: Output for headphones terminated in
6.35mm TRS connector
4. Working State Indicator/Mute Indicator
Used to indicate the working state. The indicator will
be on when it is working normally. The indicator will
flicker for 30 seconds when it delays to work. The
indicator will keep flickering when it is at mute state.
5.Volume Knob
Used to control volume
6. Input Selection Indicator
You can hear sound from LINE1 when LINE1
indicator is on.
You can hear sound from LINE2 when LINE2
indicator is on.
You can hear sound from LINE3 when LINE3
indicator is on.
You can hear sound from PRE-IN when PRE-IN
indicator is on.
7
300
CS-
A
TUBE INTEGRATED AMPLIFIER
PHONES
OFF
2
3
V O L U M E
1
2
3
0
LINE
LINE
LINE
PRE
-
IN
M I N
M A X
4
5
6
Cayin CS-300A can be used as a power amplifier and you
can control volume by connected Pre-amplifier.
CS-300A has memories and it will default last selection
when turning on.
7.
NFB.Indicator：
The NFB.-3dB indicator will be on when it is -3dB
The NFB.0dB indicator will be on when it is 0dB。
Cayin CS-300A can memorize last operation of the unit
once turned off.
8.IR Remote Sensor
Used to receive the code of remote control.
9.
Input Selector Knob
Used to select four kinds of audio sources.The input
selection indicator will be on according to the input
audio sources.This function can be operated on the
remote control.
SELECTOR
3
dB
-
dB
7 8
9