DataLocker Sentry K300 Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DataLocker Sentry K300. DataLocker Sentry K300 19 pagina's. Encrypted keypad mssd with oled screen
Ook voor DataLocker Sentry K300: Uitrolhandleiding (10 pagina's), Handleiding voor recensenten (10 pagina's)

Pagina afdrukken

1. Password Reset

6. Device will show the message "The initialized password is '1234567' ". Unplug the device and

press any key to continue.

7. Device will show the message "You must reformat the drive." Press any key to continue.

8. The device will power off and back on automatically. The password entry screen will be

displayed when it is ﬁnished restarting. Enter the default password of 1234567.

9. See

Formatting the Sentry K300

Inactivity Mode

The device is programmed to power off after 60 seconds of inactivity. To power back on, press the

Power button. This setting cannot be turned off.

Note: The device will not power off while connected to the computer. The screen may turn off after

10 seconds to prevent screen burn-in, however, you can revive it by pressing any key.

Main Menu Screen Options

• Change Password: Change the device password.

• User Password: User Password is disabled after registering to SafeConsole.

• Strong Password: Enforce strong password requirements for new password changes.

Requirements:

– 8 characters

– 1 letter

– no consecutive numbers

– no consecutive letters

• Minimum Password Length: Can be set to require 7-30 password characters for all new pass-

words.

• SafeConsole: Enables SafeConsole mode, cannot be disabled after registering to SafeCon-

sole.

• Read-Only Mode: Read-Only Mode in this menu is disabled after registering to SafeConsole.

• Auto Lock: Set the amount of inactivity time (in minutes) before the device automatically

locks. The maximum number of minutes that can be entered is 180. A second auto lock timer

can be conﬁgured in SafeConsole. Both timers will apply.

• Zeroize: Zeroize is disabled in after registering to SafeConsole.

Formatting The Sentry K300

Selecting The Correct File System

Your device is formatted as NTFS from the factory.

for more information on how to create a new ﬁle system.

Sentry K300 Managed User Guide