DataLocker Sentry K300 Handleiding voor recensenten - Pagina 6

Blader online of download pdf Handleiding voor recensenten voor {categorie_naam} DataLocker Sentry K300. DataLocker Sentry K300 10 pagina's. Encrypted keypad mssd with oled screen
Ook voor DataLocker Sentry K300: Gebruikershandleiding (19 pagina's), Uitrolhandleiding (10 pagina's)

Pagina afdrukken
2.
Safely eject the drive from the computer.
3.
Power the device back on and log in using either the administrator or user password.
4.
Select ​ B oot Mode​ on the Selection Screen.
5.
Plug in your device and power on the computer. You will need to select the Sentry K300
as the boot device, which may require changes to your computer's BIOS settings.
Note:​ Special precautions should be taken to ensure the Sentry K300 does not get
disconnected from the host system. If the computer goes to sleep, the device may be locked,
which may cause loss of access to the operating system on the drive. By default, Windows To
Go in Windows 10 disables the suspended states.
Self Destruct
Self destruct functionality is enabled by default on the device and cannot be disabled. After 20
incorrect password attempts, the device will wipe all data and return the drive to factory settings.
The message "Incorrect Password", along with the current incorrect password count, will scroll
across the screen each time an incorrect password attempt is made. Press ​ E nter​ to display
device information or press any other button to return to the password entry screen.
After each 5 consecutive incorrect password attempts, the device will power off. Pressing the
Power​ button will allow the user to continue entering passwords.
After 17 and 18 consecutive incorrect password attempts, the message "Brute Force detected!
All data will be deleted." will scroll across the screen. After the 19th attempt, the message "Self
Destruct will begin with next failed login" will scroll across the screen.
Once the 20th consecutive incorrect password attempt has been made, the device will display
"Hacking detected. All data has been deleted." The device will then power off by pressing any
button.
Note:​ After the 20th incorrect password attempt, all data is wiped from the drive and it will be
reset to factory settings. The drive will need to be reinitialized upon the next use.
Zeroize
Zeroizing the device will wipe all data on the drive and return the device to factory settings.
To Zeroize the Sentry K300:
Power on the device by pressing the ​ P ower​ button.
1.
2.
Enter the administrator password on the device.
Note:​ Only administrators can initiate a Zeroize action. Users will not see this
option.
Locate the ​ M enu​ screen by pressing the ​ U p​ or ​ D own​ key. Press ​ E nter​ to select.
3.
4.
Press the ​ U p​ or ​ D own​ key to locate the ​ Z eroize​ option. Press ​ E nter​ to select.
5.
Select ​ Y es​ , then press ​ E nter​ to initiate.
Device will ask "All saved data will be deleted. Continue?" Select ​ C ontinue​ , then
6.
press ​ E nter​ .
7.
Device will ask "Warning! Verify to Continue?" Select ​ C ontinue​ , then press ​ E nter​ .