Datalogic DH60 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Datalogic DH60. Datalogic DH60 2 pagina's.

Pagina afdrukken

INSTALLING A MICROSD CARD

Turn off the DH60.

Pull the battery latch down and remove the battery pack:

Insert the microSD card into the slot with the gold contacts facing

down:

Insert the battery's alignment lugs into the recesses, then press

firmly until the battery latch clicks.

SCANNING AND IMAGING

Laser Data Capture

Imager Data Capture

Linear barcode

2D Matrix symbol

ÌBX3ÉÎ

Relative Size and Location of Aiming System Pattern

REGULATORY INFORMATION

SRRC COMPLIANCE

This device complies with State Radio Regulatory Commission of the

People's Republic of China.

This device has been tested and found to comply with the limits for a 2.4

GHz Wi-Fi / Bluetooth device, pursuant to GB 15629.1102-2003, GB

15629.1104-2006 and the No [2002]353 document of MII.

Existence of an electromagnetic field in the environment may impact

device performance and may cause harmful interference to radio

communications. To reduce that possibility, please follow the instructions

in the user manual.

The Ministry of Industry and Information Technology has granted an

Equipment Authorization for this model device with all index evaluated as

in compliance with the State Radio Regulatory Commission of the

People's Republic of China. The information on this model device is on

file

with

the

SRRC

and

can

found

http://www.srrc.org.cn/WP_Search.aspx after searching on the CMIIT ID:

2013DJ1439 or the approval certificate number: 2013-1439.

CCC COMPLIANCE

This device meets the China Compulsory Certification (CCC) Rules, and

the implementation rule is same with CNCA-01C-020:2010.

This device is designed and manufactured to comply with the limits for

class B information technology equipment. The safety test standard is

GB4943.1-2011 and all appropriate EMC test items comply with the

standards GB9254-2008 and GB17625.1-2012. This device uses power

adapters which also have CCC certification.

The China Quality certification Centre has granted an equipment

authorization for this model device with all index evaluated as in

compliance with electrical and electronics products classes compulsory

certification implementation rules. The information on this model device is

file

and

can

found

http://www.cqc.com.cn/chinese/zscx/A0107index_1.htm after searching

on the Certificate No: 2014010902667473.

CHINA ROHS COMPLIANCE

To control and reduce pollution to the environment caused after disposal

of electronic information products and to safeguard the environment and

human health, the device is designed and manufactured to follow China

Electronic Information Products Pollution Control Regulations No. 39

Information.

The device uses nontoxic, nonhazardous, or low toxic, low hazard,

degradable, environmentally friendly and recyclable materials, meets

requirements of State standards or Industry standards for the control of

toxic and hazardous substances or elements in electronic information

products.

Judging from the results of laboratory tests, toxic or hazardous substance

contained in all of the homogeneous materials that the device uses, is

below the limit requirement in SJ/T11363-2006.

The device environmental protection use period is ten years.

At the end of its useful life, the product must be disposed of separately

from urban waste to avoid potentially negative consequences to the

environment and human health and to enable the recovery of materials to

obtain a significant savings of energy and resources.

For more detailed information about disposal, contact the supplier that

provided you with the product in question or consult the dedicated section

at the website http://www.datalogic.com.

REFERENCE DOCUMENTATION

For further information regarding DH60 refer to the SDK Help on-Line and to

the DH60 User's Manual.

For information regarding safety and regulatory refer to the dedicated

section of the DH60 User's Manual.

PATENTS

This product may be covered by one or more of the following patents:

Design patents: EP2238741

Utility patents: EP1128315B1, EP1396811B1, EP1413971B1, IT1396943,

US6808114, US6997385, US7387246.

SERVICE AND SUPPORT

Datalogic provides several services as well as technical support through

its website.

Please check our website at

www.datalogic.com

Services", then "Automatic Data Capture", and click on the links indicated

for further information including:

Downloads

Manuals for the latest versions of user manuals and product

guides.

Software & Utilities for the latest firmware release for your

product. You can also click on the following link for direct

access to this section: www.datalogic.com/products_updates.

Service Program for warranty extensions and maintenance

agreements.

Repair Centers for a list of authorized repair centers.

Technical Support Automatic Data Capture email form to contact

our technical support

WARRANTY TERMS AND CONDITIONS

The warranty period is 1 year for the device and 90 days for consumables

(e.g. battery, power supply, cable etc.) from date of purchase at our

company.

Protected to the fullest extent under U.S. and international laws. •

Copying, or altering of this document is prohibited without express written

consent from Datalogic ADC S.r.l.

Datalogic and the Datalogic logo are registered trademarks of Datalogic

S.p.A. in many countries, including the U.S.A. and the E.U.

All other brand and product names mentioned herein are for identification

purposes only and may be trademarks or registered trademarks of their

respective owners.

under "Support &