Datalogic Gryphon GD4100 Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Datalogic Gryphon GD4100. Datalogic Gryphon GD4100 10 pagina's. Bar code reader
Pagina afdrukken
1. DEFINITION
The "Bar code" option enables to install a bar code reader on a second specific RS232
connector of the ATEQ instruments.
It enables on reading of the code to select a test program and eventually to launch the test of
control (if the option is validated).
The quantity of characters read by the reader should not exceed 22. Beyond the unit will not
take into account the character string (bar code string).
1.1. C
OMMUNICATION PARAMETERS CONFIGURATION
1.1.1. Bar code reader configuration
The Bar Code reader must be set with the following communication parameters:
9600 bauds,
7 bits,
1 stop,
Parity even.
The communication parameters of the ATEQ devices are the same by default and fixed, it's not
provide to change it.
Version 1.04a
BAR CODE (OPTION)
Sheet # 694u – Bar code (option)
User guide ATEQ 6th series Page 1/10