Datalogic Gryphon I GBT4130 Handmatig scannen - Pagina 8

Blader online of download pdf Handmatig scannen voor {categorie_naam} Datalogic Gryphon I GBT4130. Datalogic Gryphon I GBT4130 8 pagina's. General purpose handheld linear imager barcode reader with bluetooth wireless technology

Pagina afdrukken

Leash Alarm

This optional setting enables or disables the Leash Mode Alarm. It specifies the number of seconds to sound the Alarm

(three tones per second) when the Reader goes out of range. This will be of benefit when conducting physical inventory or

in ensuring the Reader returns to the store if inadvertently placed in with a customer's purchase. If the Reader is asleep or

disconnected from the Base Station, the Alarm will not work. When the Reader returns within range of the Base Station, it

will emit three ascending tones and be ready to resume scanning.

Enter Programming Mode

Scan the Enter/Exit Programming Mode barcode to Enter Reader setup then scan your option then Exit Reader setup.

Reader sounds Alarm tones for 2 seconds when it loses communication with the Base Station and sounds three ascending tones

when it returns within communication range – this setting is recommended for Physical Inventory.

Reader sounds Alarm tones for 5 seconds when it loses communication with the Base Station and sounds three ascending tones

when it returns within communication range – this setting is recommended to help ensure the Reader stays within the store.

Reader sounds no Alarm tones – Leash Alarm is Disabled. Note – you may only set one Alarm option (either Disable or Enabled).

~ (tone pattern) # > # # # # ~

~ (tone pattern) # # ~

Page 8 of 8