Dust Free Bio-Fighter VersaLight 1SVL14 Installatie- en bedieningshandleiding

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Dust Free Bio-Fighter VersaLight 1SVL14. Dust Free Bio-Fighter VersaLight 1SVL14 7 pagina's. 1s and 2s ultraviolet light systems

Pagina afdrukken

GENERAL

This product is designed to help disinfect the inter-

nal surfaces of heating, ventilation, and air condi-

tioning systems. Bacteria and viruses that are in

the air stream that passes through the system will

also be reduced. The result is an improved level of

indoor air quality for occupants and improved sys-

tem hygiene.

The Bio-Fighter® emits ultraviolet(UV-C) radiation

at a frequency of 254 nanometers, which has been

proven effective in damaging the DNA of microor-

ganisms such as viruses, bacteria, yeast and

molds. This process either destroys the micro-

organism or neutralizes its ability to reproduce.

P/N

Model 1SVL14

#06151

Model 1SVL16

#06153

Model 1SVL20

#06155

Model 1SVL00

#06208

P/N

Model 2SVL14

#06152

Model 2SVL16

#06154

Model 2SVL20

#06156

Model 2SVL00

#06209

BIO-FIGHTER

VersaLight 1S and 2S

Ultraviolet Light Systems

Installation & Operation Manual

FEATURES

• Reduces or prevents mold growth on HVAC

coils, allowing them to operate at peak effi-

ciency. Also significantly reduces bacteria,

viruses, fungi, and yeasts in the ductwork.

• High output, long life UV-C lamps.

• Remote-mount lamp configuration.

• Multi-input voltage electronic ballast.

• Odor control (O3) lamps available.

INCLUDED INSIDE BOX

• Bio-Fighter® VersaLight UV-C system

• UV-C bulb(s)

(Not included on models 1SVL00, 2SVL00.)

• Power cord

• Viewport(s)

• Gasket(s)

• Sheet metal screws

• Installation & operation manual

• UV warning label for duct

• Registration card

TOOLS REQUIRED FOR INSTALLATION

• Electric drill

• Phillips screw bit or screwdriver

• 1/2" drill bit

• 1" drill bit or holecutter

• Eye protection

BEFORE INSTALLING

• Read all instructions carefully. Failure to do

so could damage the equipment or cause

harm to yourself or others.

• Acknowledge all warnings.

• Only qualified technicians should perform

the installation.