AC MGA0800/A1 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AC MGA0800/A1. AC MGA0800/A1 16 pagina's.

Preparation and installation

Please prepare installation tools: knife and scissors, and wear protective gloves.

Please remove wrapping film and packing belt, then remove the carton, take out the air

conditioner.

Please

conditioner model is right .

Notes:

After removing the outer package, please make sure that the air conditioner is placed

upright , and not placed horizontally or upside down.

After removing the outer package, please check carefully whether the appearance of the air

conditioner is damaged or oil polluted, if the appearance of the air conditioner has obvious

deformation or oil stain, please contact the manufacturer in time.

If there is no need to install the product immediately or it needs to be transported to other

place, please repack the air conditioner after the checking.

It is recommended to recycle the unpacking materials.

Installation tool: Phillips screwdriver

Installation Steps：

Choose cut location on the cabinet according to the holing diagram, remove the shadow

area and make the installation hole.

Make air conditioner flange close to cabinet door,

surface of the cabinet firmly with M5 screws.

Check whether air conditioner is installed levelly and firmly.

Notes:

1) Check whether air conditioner drainage loop is smooth, in case that drainage is blocked.

2) When determine the location of the installation hole in the cabinet, you should avoid the inlet

and outlet air ports inside the cabinet are not blocked by any components inside the cabinet, and

the two should be kept a horizontal distance of more than 150mm; otherwise, it is prone to lead

check the attachment list and accessory bags in the carton,

Fix the air conditioner on the installation

check whether the air