Dust Free 19300 Installatie- en bedieningshandleiding - Pagina 6

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Dust Free 19300. Dust Free 19300 13 pagina's. Germicidal uv-c ultraviolet light
Ook voor Dust Free 19300: Installatie- en bedieningshandleiding (5 pagina's)

Pagina afdrukken

DUST FREE

LIGHTSTICK

REMOTE LAMP INSTALLATION

• Drill a 7/8" knockout into the delta plate

and place gasket (included) around

knockout.

• Insert lamp directly into knockout and

secure the lamp to the delta plate with

two self-drilling screws. (Screws and

rubber washers included.)

• Connect remote lamp extension cord.

Note: A-Coil delta plate installation

does not use lamp bracket.

POWER MODULE INSTALLATION

• With the lamp cordage facing away from

the mounting surface, install the power

module in a suitable location on the side

of the system or within the control panel

of the air handler using the two long

self-drilling screws (included). Do not

overtighten.

• Drill a 7/8" knockout in the outer sheet

metal where the remote lamp extension

cord will be inserted.

• Connect the power module to constant

24VAC power.

• Connect lamp to power module.

Connectors are keyed for proper

alignment.

WARNING

UV Light Hazard.

Can cause serious eye and skin damage.

Do not look at UV-C light. Wear UV-C eye and

skin protection.

NOTICE

Clean lamp prior to installation.

Use a cotton cloth to remove dirt and

fingerprints. Failure to do so could shorten the

lamp's lifespan.

INSTALLATION & OPERATION MANUAL

(A-Coil Delta Plate)

Fig. 4. Insert lamp into delta plate

knockout and secure with screws

and washers. Connect remote lamp

extension cord.

(Remote Lamp)

Fig. 5 Secure power module to air

handler or duct with long screws. Do not

overtighten.

NOTICE

Fully Seat Lamp Connector.

Failure to properly seat lamp connector could

result in improper lamp operation and/or

compromise water resistance.

NOTICE

Lamp cleaning not required after

installation.

Reference specifications page for lamp

replacement part number and schedule.