CB E-6P Handleiding voor installatie, gebruik en onderhoud - Pagina 4

Blader online of download pdf Handleiding voor installatie, gebruik en onderhoud voor {categorie_naam} CB E-6P. CB E-6P 6 pagina's.

INSTRUCTIONS FOR USE

Fig.

Fig. 3

The chicken-spit is provided with an appliance which does not allow the working of the heating elements

when gear-motors are off, in order to avoid the chickens burning.

Proceed as follows to load the Spit :

Take out the cold rods with hands , insert the chicken as shown in fgure 4 and put the rods in the spit.

At the end of the cooking time take off the spits, using a kitchen glove.

Never put hands or something else in the spit when working.

rev. 2 – 09/06/2009

It is advisable that the initial installation and setting up of the

chicken-spit is carried out by a reliable engineer. It is important to

follow the setting up procedure exactly :

Press switch A to light the cooking chamber.

Press the gear-motors switches (B) to start them for the spits

rotation.

Regulate the working of the resistances using the hand grip

D. The regulators of the resistances (Infnit control) have the

function to change the starting time of the resistances used

for the heating of the oven. Every value corresponds to one

unity, until the 10 unities are reached. If at this value the

hand grip is turned ulteriorly, we return to 0 (resistances off).

Every unity corresponds to a certain number of seconds in

which the resistances remain on; for the rest of the unities

the resistances remain off. The value corresponding to the

starting times of the resistances can be changed at any

moment.. Working is signalized by the relative pilot lamps)

Positioning the regulators on the MAX position the heating

elements work continuously.

Turning again the handle you return to 0 (heating elements

are off).

Each energy regulator corresponds to a cooking spit. The

regulators position is in sequence with the spits position.

Fig. 4

4/6