CB2 LINEAR Montage-instructies - Pagina 3
Blader online of download pdf Montage-instructies voor {categorie_naam} CB2 LINEAR. CB2 LINEAR 4 pagina's. Tall chest
Ook voor CB2 LINEAR: Montage-instructies (5 pagina's), Montagehandleiding (11 pagina's)
Pagina afdrukken
linear
NIGHTSTAND
drawer
front
"R" drawer
side
NOTE:
Open end
of glide
hardware
Secure drawer front to right and left drawer
sides with 4 screws as shown using a phillips
5
head screwdriver. Do not over tighten the screws.
Fit drawer back onto drawer bottom and align
with corresponding holes of drawer sides. Secure
drawer back to drawer sides with 4 screws using
a screwdriver.
7
Repeat steps 5-7 for remaining drawer.
Made in Vietnam - r05
NOTE: Do not over
tighten the screws
"L" drawer
side
drawer
back
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Slide drawer bottom into corresponding grooves
6
of drawer assembly.
NOTE: Make sure to
keep drawer level so
as not to damage glides
during assembly
drawer
assembly
With the assistance of another adult, position unit
upright. Pull ball bearing glides of assembly all the
way forward. Fit drawer glides of drawer into
corresponding drawer glides of assembly as
shown. Firmly push drawer into assembly until the
glides are securely engaged.
8
Assembly is now complete.
drawer
bottom
Make sure glides are
pulled out of the case, and
ball bearings are at the front
of the extended glides
Page 3 of 4