CB2 MONOLITH Montagehandleiding - Pagina 13
Blader online of download pdf Montagehandleiding voor {categorie_naam} CB2 MONOLITH. CB2 MONOLITH 13 pagina's. Wardrobe
Ook voor CB2 MONOLITH: Montagehandleiding (6 pagina's)
Pagina afdrukken
monolith
wall mounting assembly
large
screw
mounting
bracket
wall
strap
NOTE:
If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or
your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware
be installed. For safe mounting, it is essential to use wall anchors appropriate to
your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever
possible.
A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2"
below each mounting brackets mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall
that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the mounting brackets to the wall by inserting 2 large screws through
each mounting bracket and into the wall anchor in the wall.
E) Position the unit so the mounting bracket on the back edge is allowed with the
wall bracket.
F) Lace one end of each wall strap through corresponding brackets, and into the
other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
Made in Vietnam - r06
WARDROBE (RIGHT)
mounting
bracket
D
C
plastic
anchor
A
small
screw
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
WALL
Page 6 of 6