CB2 RODNEY Montage-instructies - Pagina 5

Blader online of download pdf Montage-instructies voor {categorie_naam} CB2 RODNEY. CB2 RODNEY 5 pagina's. Tall chest

Pagina afdrukken
rodney
safety mounting instructions
NOTE:
If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional
or your local hardware store.
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 1 wall bracket to top of unit as shown, using 2
small screws per bracket.
B) Determine the final location of unit. Mark position on the
wall, approximately 2" below the bracket mounted to the
back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the wall bracket to the wall by inserting 2 large
screws through the wall bracket and into the wall anchor in
the wall.
E) Place the unit so the wall bracket on the back edge is
aligned with the wall bracket.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure. Repeat steps for
remaining brackets and wall strap.
Made in Vietnam - r06
TALL CHEST
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
wall
strap
plastic
A
anchor
small
screw
F
wall
large
D
bracket
screw
C
wall
bracket
Page 5 of 5