Datalogic Jet Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Datalogic Jet. Datalogic Jet 2 pagina's. Vehicle cradle
Ook voor Datalogic Jet: Snelstarthandleiding (2 pagina's), Gebruikershandleiding (2 pagina's)
Pagina afdrukken
TECHNICAL FEATURES
Datalogic Jet™ Single Cradle Desk
Electrical Features
Power Supply*
from 12 to 14 VDC± 5%
Consumption
Max. 2.5 A
Indicators
Power on LED (green)
Spare battery charge LED (bi-colored)
Charge Time
Li-Ion Battery: max. 2.5 hours
Communication Features
Interface
RS232, USB 1.1 version
Baud Rate
RS232 = up to 115200 b/sec; USB = up to 12 Mb/sec
Environmental Features
Working Temperature**
0° to +50 °C / +32° to +140 °F
Storage Temperature
-20° to +70 °C / -4° to +158 °F
Humidity
90% non condensing
Degree of Protection
IP20
Mechanical Features
Dimensions
137 x 127 x 65 mm / 5.39 x 5 x 2.56 in
Weight
(about) 500 g / 17.6 oz
*
Recommended power supply: 94ACC4595 FPS18 W/O POWER CORD.
**
Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).
WEEE COMPLIANCE
822000572 (Rev. E)
Datalogic Jet™ Single Cradle Desk
The Datalogic Jet™ Single Cradle Desk paired with one Datalogic Jet™ PDA builds a Reading System for
the collection, decoding and transmission of barcoded data.
The communication between PDA and host PC through the Datalogic Jet™ Single Cradle Desk may
occur also by using the standard ActiveSync® connection.
A
Figure 1 – Datalogic Jet™ Single Cradle Desk
A)
LED Indicators
B)
PDA Contacts
C)
Spare Battery Slot
The Datalogic Jet™ Single Cradle Desk is a serial communication adapter between the host computer
and the Datalogic Jet™ PDA, and as such, no power supply is required to be connected to the Cradle for
communications.
Since the Datalogic Jet™ Single Cradle Desk also functions as a battery charger, a power supply is
required for battery recharging operations, both for PDA and spare battery pack recharging.
C
B
F
D
E
D)
USB Type B Connector
E)
RS232 Connector
F)
Power Jack