4living COLLECTION 266398 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} 4living COLLECTION 266398. 4living COLLECTION 266398 8 pagina's. Hanging chair

Pagina afdrukken

EN HANGING CHAIR( FOR DOMESTIC USE)

Parts Supplied

Ref Description

hanging chair

hanging tube

hanging base

Cushion

pillow

safety strap

Fittings Supplied

Ref Description

Screw

12 x 7,3 mm

Nut

12 mm

coil spring

10,25 mm

Bolt

8,5 mm

Illustration

Q'ty

1 pc

Illustration

Q'ty

1 pc

12mm

1 pc

Warnings

1. This product is intended for a maximum weight of 130 kgs.

Do not exceed this weight.

2. Do not stand on the product.

3. This product should only be used on firm, level ground.

3. Make sure the frame remains in contact with the ground.

4. Keep small parts out of reach of children.

5. Check all screws or bolts are tightened and inspect regularly.

6. Do not tighten screws until fully assembled.

7. Do not overtighten screws or bolts.

8. Do not use this product if parts are missing, damaged or worn.

9. This product has been designed for use by one person at a time.

Before You Start

1. Unwrap all packaging materials

2. Check the pack and make sure you have all of the parts listed above.

3. When you are ready to start, make sure that you have the right tools to hand, plenty

of space and a clean dry area for assembly.

Assembly

a) The bolt and the hook are put inside the tube of hanging base.

Remove them before Assembly.

b) Stand the hanging base on the level ground , then inset the hanging tube into the

base and fix both of them with the screw and nut.

c) Put the bolt into the hole at the top of hanging tube, and the spring hook into the

hole of the bolt.

d) After fixing the hanging tube into the base, check if they are stable. If so, then hang

the chair to the hanging tube with the hook and attach the safety strap to the base

and chair. Place the cushion on the chair.

Care Instructions

1. To clean wipe with a sponge and warm soapy water then wipe with a dry, clean

cloth. Do not use solvent based cleaners or detergents as they can bleach or

damage the product.

2. Never use a pressure hose or washer to clean the product.

3. Never use scourers, abrasives or chemical cleaners.

4. Wipe clean with a soft dry cloth.

5. Store the product in a cool dry place. Before storage ensure that it is clean and dry.

6. We recommend the use of furniture covers to protect your product when not in use.

7. During bad weather and winter months the product should be stored in a cool

dry place.

8. To clean metal frame, use a soft cloth moistened in lukewarm soap and water.

Then buff with a dry clean cloth.

9. The frames are manufactured using the powder coated steel tubing. When steel

is exposed to air and moisture it will rust. Any scratches on the paintwork should be

touched up immediately with metal paint, otherwise corrosion may occur.