Datalogic Joya X2 Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Datalogic Joya X2. Datalogic Joya X2 2 pagina's.

Pagina afdrukken

General Purpose

THE TERMINAL

D. Laser Safety Label

A. Color Display

B. Front Scan Key

E. Product Label

C. Keyboard

F. Micro USB Port

G. Cold Boot Button

*. Remove protective film cover before use

H. Data Capture

I. Dock Contacts

Window

(

822001771

Rev A)

Nov. 2017

EYPAD

1. Programmable Function Keys.

2. Scan Key – Use it to turn on the Joya X2.

ETTING

TARTED

Insert the Battery

1. Insert battery contacts into the hole of the

battery box as shown in the picture below

2. Unscrew and remove the bottom cover

3. Insert the top cover, then insert the bottom

cover and fasten it with a screwdriver

Charge the Battery

With Single Slot Dock

Do not use the Joya X2 until

batteries are charged for minimum

4 hours.

CAUTION

We recommend that the Joya X2 GP

is used only for WiFi applications.

The microUSB connector is intended

only

for

occasional

OTE

communications.

ESETTING THE

OYA

Cold Boot

Simultaneously press F1 + F2 + ENTER

Press with a pin or a paper clip the cold boot

button on the back of the mobile computer.

Warm Boot

Simultaneously press SCAN + ENTER.

Clean Boot

1. Perform a cold boot

2. As soon as the device is rebooting, press

simultaneously Esc + ENTER, holding both

keys down for few seconds

3. Press ENTER to confirm.

Suspend

Simultaneously press SCAN + F1

Resume from Suspend

Press SCAN.