4load CHARGE BOX 3.6 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 4load CHARGE BOX 3.6. 4load CHARGE BOX 3.6 9 pagina's. Battery-charger 3,6 amp
Ook voor 4load CHARGE BOX 3.6: Gebruikershandleiding (9 pagina's)
Pagina afdrukken
Impulse charging
As soon as the charger starts the charging process,
it automatically recognises the battery voltage. It
changes over to impulse charging when the battery
voltage is in the area of 7.5 V to 10.5 V. This impulse
charging continues until the battery voltage rises to
more than 10.5 V; after that the charger changes
back to the charging mode selected before. This
process is able to regenerate most flat, used or
overcharged batteries so that they can be re-used.
Device protection function
As soon as an abnormal situation such as short-
circuits, battery voltage below 7.5 V, open electric
circuit or reversed polarity occurs, the charger
switches over to STANDBY mode. If you do not make
any other adjustments, the system will remain in
STANDBY mode. In cases of reversed polarity, the
LED display "Error"
T lights up, too. In this way,
the sparks that often arise during the connection
process are avoided.
Overheating protection
If the appliance becomes too hot during charging,
the power output is automatically reduced. This
protects the appliance from damage.
Maintenance
The appliance is maintenance-free.
D isposal
The packaging is wholly composed of
environmentally-friendly materials that
can be disposed of at a local recycling
centre.
Do not dispose of electrical
appliances in household waste.
Operation / Maintenance / Disposal / Information
I nformation
S ervicing
J
Have your device repaired only by quali-
fied specialist personnel using original
manufacturer parts only. This will ensure
that your device remains safe to use.
We reserve the right to make technical modifications in
the course of product development.
GB
15