DuTCH audio IM2.1 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} DuTCH audio IM2.1. DuTCH audio IM2.1 5 pagina's.

Insert 7:

Insert 7 is a regular passive insert.

Insert 8:

With insert 8 you can swap the order of insert 8 from insert 8 to pre insert 1, so it basically

becomes insert 0. When you push the '8 pre/post' button, this is what will happen:

8 pre/post off: inputs > 1>2>3>4>5>6>7>8 > outputs

8 pre/post on: inputs > 8>1>2>3>4>5>6>7 > outputs

Outputs:

You can choose between the 2 outputs by

selecting

the corresponding

button.

It's

also

possible to use both outputs at the same time,

but keep in mind that this could cause some

impedance and so level changes.

Ins bypass:

When you engage 'ins bypass' all inserts will be

bypassed. You will see that all lights on the insert

switches will go out, giving you extra visual

feedback. Simply said, the input section will go

directly to the output.

Out 1:

Out 1 is a passive output selector with just relays,

so no active circuit. So basically, it's passing the signal from the inserts straight into the

output. But when you push the 'out 1 bp offset', it will bypass all inserts and the active gain

stage 'out 1 offset' comes active. The monitor offset will allow you to change the bypass

gain to make up for the processing of the inserts. This way you can A/B between the analog

processing and level-matched bypassed signal. The gain range is set from -2dB to +8dB

done with a potmeter instead of a stepped switch for a more precise adjustment. And since

this is just an AB function no recall is needed. Internally the gain range of the monitor trim

can be calibrated with 2 multiturn trimmers.

Out 2:

Out 2 is a passive output selector with relays and no active stages.