DuTCH audio IM2.3s Handmatig - Pagina 6
Blader online of download pdf Handmatig voor {categorie_naam} DuTCH audio IM2.3s. DuTCH audio IM2.3s 7 pagina's. Insert machine
Pagina afdrukken
circuit
is
based
additions/modifications.
The internal PSU section is build around industrial-grade Meanwell SMPS's which run way
more silent and are way more efficient then old-school linear PSU's. Both the relays/leds
and active circuit PSU's are running on their own separate PSU.
When this device is used in passive mode, so without active stages, it's 100% passive and
only relay-contacts are inline. This means it's basically a straight wire.
Pushswitch labeling:
To have some extra visual feedback on the push-switches you can put labels under the
switch-covers. You can simply, but carefully, remove the switch cover with a small
screwdriver and put something like a transparent dymo letratag sticker on the white plastic
piece inside the switch-cover. More info and a manual can be found on our website.
Specifications:
Maximum gain passive: >+24dBu
Maximum gain active gain: +24dBu
Noise level passive: >118dB(a)
Noise level active: >116dB(a)
Stereo crosstalk: >110dB(a)
Stereo crosstalk mid/side: >80dB(a)
THD passive: 0.00042% (AD/DA limitations)
THD active: 0.00045%
Input voltage 100 to 240VAC 50/60HZ.
Power consumption minimum 5 watt
Power consumption maximum 30 watt
(Power consumption depends on the amount of inserts, input, output etc activated)
Unit size: standard 2u 19 inch, depth 25cm
Weight: approx 4kg
Specifications subject to change because always improving
Service and warranty:
We offer a standard 2 year limited warranty on all of our products.
In the event that you or a third party has (partly) altered or repaired anything, the
warranty will expire, and you will be held responsible for the damages caused by any
possible misfunctioning of the product. Warranty repairs are only made by us or by a
workshop we agree upon.
We are not responsible for any malfunction of or damage caused by parts that are not
produced by DuTCH.audio.
If you choose to ship back a faulty unit to us you must contact us before you do so. We
need the serial number (located on the back of the unit) to handle the repair and if
warranty is still valid.
The product should be returned in it's original package or packed in such a way that it
is not damaged during the shipment with extra support for the rack ears. We are not to
be held responsible for any damages during the shipment.
on
the
well-known
circuit
from
Wayne
Kirkwood,
but
with