Datamate M83 Series Handmatig - Pagina 11

Blader online of download pdf Handmatig voor {categorie_naam} Datamate M83 Series. Datamate M83 Series 16 pagina's. Rectangular connectors

APPENDIX 2 – COAX CONTACT DETAILS (continued).

A2.3. COAX ASSEMBLY INSTRUCTIONS – M80-308/309, M80-318/319.

1) Strip cable to dimensions shown against relevant part (see appropriate engineering

drawings).

Inner Insulator

Inner Conductor

2) Identify pieces of coax connector to be assembled.

3) Slide sleeve onto cable past stripped area.

4) Push the cable and sleeve into the body, as far as it will go. The cable inner

conductor will be visible through the hole in the top of the coax body, and should go

into the slot in the inner contact of the body. Make sure that the braid goes outside

and over the end section.

Inner Conductor

5) Solder the cable inner conductor to the body inner contact. When cool, place the

insulator inside the top, and press the cover into place. Slide the sleeve up to meet

the coax body, and hexagonal crimp in place.

Cover

Insulator

Solder here

COMPONENT SPECIFICATION

Body

- 11 -

Outer Insulator

Braid

Insulator

Cover

Sleeve

(PTFE)

(metal)

Sleeve

Crimp here

C00525