Datamax M-Class Mark II Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Datamax M-Class Mark II. Datamax M-Class Mark II 6 pagina's. Rfid option
Ook voor Datamax M-Class Mark II: Handmatig (8 pagina's), Snelstarthandleiding (4 pagina's), Handmatig (10 pagina's), Snelstarthandleiding (8 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (8 pagina's)

Contents of the Cutter Kit

This kit contains the following item:

Cutter Assembly

Follow the steps listed below to install this option.

Tools Required

To install this option you will need a #2 Philips screwdriver.

For your safety and to avoid damaging the equipment, turn 'Off' and unplug the printer before

installing the Cutter.

CAUTION

 Turn 'Off' the power switch and unplug the

printer.

 Open the cover. Remove any installed media

from the printer.

 Remove the Fascia by gently pulling it

forward.

 Loosen and remove the Thumbscrew, then

remove the Tear Plate (or if equipped, the

Present Sensor option).

Fascia

Thumbscrew

Tear Plate