DutchCrafters Cayman Crib Montage-instructies - Pagina 3

Blader online of download pdf Montage-instructies voor {categorie_naam} DutchCrafters Cayman Crib. DutchCrafters Cayman Crib 4 pagina's.

Step 3

Attach crib spring (H) to metal insert with four ¼" x 1" connector bolts and lock washers using Allen wrench

provided. Small springs should be at top to support crib mattress. See figure 4. There are three metal inserts

for height adjustment of crib spring. Note: Crib spring should be lowered as child grows to discourage

child from trying to climb out. DO NOT fasten the bolts all the way until you have completed

Step 4

Lock Washer and

¼" x 3"

Connector Bolt

CAUTION: ANY MATTRESS USED IN THIS CRIB

MUST BE AT LEAST 27¼" BY 51 / "WITH

A THICKNESS NOT EXCEEDING 6 INCHES.

nstructIons for

step 4

Pivot Arms

(D)

Short Post

nstructIons for

Attach small posts (D) to ends of front panel (C) with two ¼" x 3" connector bolts and

lock washers and two ¼" x 2½" as shown in figure 2, making sure to center panel on

posts. Turn connector bolts snug. The word "inside, " located on bottom rails, should be

on the inside of the crib. Now tighten crib spring bolt.

Short Post (D)

ssemblIng

Metal Inserts

(H)

Crib Spring

¼" x 1"

Connector Bolt

ssemblIng

(C)

Front Panel

Your crib is now ready for bedding.

AymAn

Tools Needed:

(G)

Short Post

AymAn

Tools Needed:

Lock Washer and

¼" x 4"

Connector Bolt

Short Post (G)

rIb