Datamax I-Class Mark II Installatie- en gebruikshandleiding - Pagina 6

Blader online of download pdf Installatie- en gebruikshandleiding voor {categorie_naam} Datamax I-Class Mark II. Datamax I-Class Mark II 12 pagina's. General purpose input output (gpio) option
Ook voor Datamax I-Class Mark II: Snelstarthandleiding (4 pagina's)

Pagina afdrukken

1. Installing the Option
2. Setup and Operation

F) Install the GPIO Card into the printer. First insert the "Port" end into the cut-out in the

rear of the printer. Then pivot the GPIO Card onto the two Standoffs.

G) Loosely install the two previously removed Jack Screws and the two 5.5mm Nuts.

H) Tighten the two Jack Screws and the two 5.5mm Nuts. Proceed to "Configuring the

Hardware" on the next page.

Jack

Screws

5.5mm

Nuts