Datamax C82-00-40000004 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Datamax C82-00-40000004. Datamax C82-00-40000004 10 pagina's. Cutter option

Overview

This document describes the contents, installation, and use of the Cutter option for the H-Class printer.

After verifying the contents of the kit and the tools needed, follow the steps below to install and begin

using the cutter. A maintenance procedure and a parts list are also included, so keep this documentation

for future reference.

For your safety and to avoid equipment damage, always turn 'Off' power and unplug the

printer's power cord before beginning this installation and when performing service.

CAUTION

Contents of the Cutter Kit

This kit contains the following item:

Cutter Assembly

Tools Required

To install this option, you will need a standard screwdriver (and to perform maintenance, you will need a

Philips screwdriver).

A) Turn 'Off' the Power Switch and unplug the

power cord from the AC Receptacle.

Power Switch

AC Receptacle