Datamax 220220-000 Instructieblad - Pagina 2
Blader online of download pdf Instructieblad voor {categorie_naam} Datamax 220220-000. Datamax 220220-000 2 pagina's. 4t battery charger
Troubleshooting
Symptom
Possible Cause Solution
Battery charger
Defective
will not charge
battery.
the battery.
Battery too hot
or too cold.
Faulty LED.
Battery becomes
Defective
hot.
battery.
Battery Error LED
Faulty condition
is displayed.
identified.
Defective
battery.
No LEDs are
Power supply
displayed.
cord not
connected.
Bad power
supply.
Agency Approvals
FCC Notice
Replace battery.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
Allow to adjust
in a residential installation.
to room temp.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, it may
Send in for
cause harmful interference to radio communications. However there is no
repair.
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
Discontinue
which can be determined by turning the equipment off and on, the user is
charging and
encouraged to try to correct the interference by one or more of the following
measures:
remove battery.
Reorient or relocate the receiving antenna.
Remove battery
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which
from charger
the receiver is connected.
and re-insert.
Consult the dealer or an experienced radio/TV technician for help.
Replace
battery.
Applicable Directive
Check power
89/336/EEC, 73/23/EEC
supply
connections.
Applicable Standards
EN55022 (1998)
Replace power
EN55024 (1998)
supply.
EN60950 (1992)
Warranty
The Company warrants that Datamax-O'Neil products are free from defects
in manufacturing materials and workmanship for one (1) year from date of
original purchase to Buyer/Distributor (OEMs 90 days from the date of
purchase). Batteries, cables, power supplies, and other accessories will be
warranted for ninety (90) days. Datamax-O'Neil makes no other warranties,
expressed or implied, including implied warranties of merchantability and
fitness of purpose.
If you try to repair, disassemble, or change the product in any way, or use
parts not provided by Datamax-O'Neil without prior, written authorization, all
warranties are void.
For complete warranty and service information, see the warranty card
included in your printer's original packaging.
No Liability for Negligent Use
In no event shall Datamax-O'Neil be held liable for any damages whatsoever
(including, without limitations, damages for loss of profits, business
interruption, loss of information, or other pecuniary loss) arising out of
negligence in use and care of the product.
COPYRIGHT © 2010, DATAMAX-O'NEIL
110145-003
4t Battery Charger
Instruction Sheet