Datapath X4 Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Datapath X4. Datapath X4 14 pagina's. Stand alone display wall controller
Ook voor Datapath X4: Handmatig (2 pagina's)

Pagina afdrukken
Datapath X4 Installatiehandleiding

Windmill Configuration

The windmill configuration uses the same method of calculation as for the 2 x 2 configuration, however
the source canvas (shown in green) will have elements outside the viewing area of the monitors. The none
viewing areas are depicted in green in Fig. 5.

Monitor Rotation

When using monitors in portrait mode the region captured requires rotation. In the windmill configuration
(Fig.5) monitors 1 and 4 are required to be rotated. This is done using the Transform dropdown menu in
the Modify Input Capture regions dialogue (Fig. 5).
In the example above (Fig.5) the bottom of the monitor is facing left therefore Region 1 should be rotated
90 degrees. the bottom of monitor 4 is facing right indicating the monitor has been rotated 3 turns,
therefore Region 4 should be rotated 270 degrees.
Fig.5
Fig.6
9