DUUN 140001 Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DUUN 140001. DUUN 140001 16 pagina's. Wood grab
Ook voor DUUN 140001: Gebruiksaanwijzing (9 pagina's)
5. Power transmission shaft
The tractor is disengaged and the handbrake is applied
before the shaft is connected to the tractor's PTO.
The maximum power output speed is 540 rpm. The drive
shafts are always to be equipped with original protection
covers.
Damaged and worn covers are to be replaced
immediately!
Make sure that all covers for the shaft are in good condition
and correctly fitted. Never start the machine when this is not
in order. The locking chains for the plastic covers are always
to be fixed to the appropriate brackets in order to prevent
the covers to rotate. The covers must be lubricated
according to the specified interval.
6. Rotating parts – high risk of injury
The rotating parts of the machine can cause major damage
to body parts that come into contact with them. Do not allow
anybody to stay in the work area when a machine is in
operation.
7. Hydraulic high fluid pressure
Be careful when you work with hydraulics. Wear eye
protection and gloves. Hydraulic oil under high pressure may
penetrate the skin and cause serious infections. See a
doctor if you have sustained an injury. Make sure no one is
close by when performing hydraulic functions.
8. Rotating parts – risk of crushing
Pay special attention to clamping risk at points marked for
this.
9. Clamping risk when adjusting
When adjusting the support wheels, make sure that you do
not stand with your feet under the wear steel.
5