Dataplot EMBLEM EASY Airpress standard Bedieningshandleiding - Pagina 5
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Dataplot EMBLEM EASY Airpress standard. Dataplot EMBLEM EASY Airpress standard 20 pagina's. Pneumatic eyepress
Pagina afdrukken3 Technical Data
3.1 Machine Specifications And Operation
The EMBLEM AIRPRESS Standard has been designed to bolt it to
the customer's work bench or the optional Table.
Once the machine has been placed on its permanent location, without fitting
the air hosepipe into the connection, verify that it has not suffered any blow
or breakage while being transported and it has not any loose parts.
The operation of the machine is very simple:
(B)
(P)
Fig 1
1
). When pressing down manually the safety protection "P", with the black plastic
st.
knob placed on the front and side of the machine, until it reaches completely
its stroke (position "ON", see Fig. 4), preventing the access of operator's hands
to the setting area "X", the screw "Y" placed on the side makes contact and
activates the micro end of race which sets the pneumatic cylinder in motion).
Position "off"
Fig. 3
2
). The pneumatic cylinder "B" causes its vertical axle to descend. Attached to its lower
nd.
part there is one puncher "C" and a setting die "D". The aim of the downward movement
of the axle is to cut a hole with the puncher and as an effect of the pressure that the top
die "D" puts on the bottom one "E", to set the eyelet (grommet) on the setting area "X".
(F)
(D)
(C)
(Y)
(Z)
(P)
Fig. 2
Position "on"
Fig. 4
(X)
(E)
(Y)
(Z)
Page - 5 -