ADE KWE15-IP65 Bedieningshandleiding - Pagina 7
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADE KWE15-IP65. ADE KWE15-IP65 16 pagina's. Compact scale in stainless steel housing
Pagina afdrukken
2.12 Counting Function
Switch on the scale and put on the reference number of pieces.
This function can be activated only with loaded platform!
Press both [SET] and [ON] keys together for 3 seconds. Display shows "pcs_y".
Press [TARE] to deactivate the counting function. Display shows "pcs_n".
To confirm your choice press [ON].
When choosing „pcs_y" press [ON]. Display will show "000000" and the first digit of reference
number of pieces is blinking. Now press [SET] to change the blinking digit, press [TARE] to
change the blinking digit value. Following this way enter the reference number of pieces put on
the platform and press [ON] to confirm. With setting the scale will store reference number and
will automatically turn into counting mode. Arrow at "PCS" will show activated counting mode.
Now place an arbitrary number of pieces on the weighing platform and display shows the
number.
The settings will be stored in memory when scale is switched off.
For returning to weighing mode press both [SET] and [ON] together for 3 seconds, and choose
"pcs_n" by pressing [TARE] Confirm your choice with [ON].
The setting will be stored and scale return to weighing mode. When scale is switched on next
time, it starts in weighing mode.
Piece counting function doesn't work, if unit "lbs" is selected.
The user has different parameters to adjust the scale to his preferences.
The following parameters can be adjusted:
For activating parameter setting press [SET] and [TARE] on same time for 3 seconds. There will
appear menu „PrE" to adjust the display precision.
To enter the following menus, press [ON] again and again. Within the menu you can
change adjustments by pressing [TARE]. Pressing [ON] confirms the choice, stores
setting and changes to next parameter.
By pressing [SET] you'll return to weighing mode without retention of the setting.
KWE-190107-Rev008-UM-en
3.
Environment Parameter Setting
PrE
(Adjustment display precision)
UNT
(Adjustment units)
ZEr
(Zero tracking)
FIt
(Stability Filter)
SAU
(Power Saving Mode / Standby)
SPd
(Display Update Speed)
drl
(Setting for zero tracking)
Prt
(Printer setting)
6