AGRI-COVER Tonnosport Handleiding voor installatie-instructies - Pagina 2

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} AGRI-COVER Tonnosport. AGRI-COVER Tonnosport 17 pagina's. Roll-up cover

Pagina afdrukken

PREPARATION

This document is typically used with trucks that have 78" or longer boxes. Unpack

cover components and clean truck box. For additional installation assistance, go to

accesscover.com for install video.

COMPONENTS

• (6) Clamps

• (2) Driver side rails

• (1) Left and (1) right tension adjuster

with nuts and bolts

• (2) Passenger side rails

• (1) Pre-rolled cover assembly

NOTE: With an under the rail drop-in bed liner, installation is possible with minimal

trimming/cutting of bed liner at front corner of box and back by tailgate to allow side rail

to install properly. Considerable trimming/cutting is required with an over the rail

drop-in bed liner.

NOTE: For additional protection against the elements, locate and seal miscellaneous

factory holes, crevices, stake pockets, etc. that may be in box (sealant not included).

NOTE: Tonneau cover and side rail appearance may vary. Typically a vehicle with a

78" box or longer is provided with two multi-piece side rails.

CAUTION: Over torquing hardware may damage components.

PARTS DIAGRAM

Front (closest to cab)

QUICK CLIP™

Storage Straps

(6) Rail clamps

EZ-DIAL™

Tension Adjuster

Left side rail

TOOLS NEEDED

• (2) 1/2" Wrenches

• Marking pen

• Protective eyewear

• Tape measure or ruler

• Torque wrench with 1/2" socket

• Spring clamp - optional

• 1/8" Allen wrench - optional

Front bar

Support bows

Slide Locks on

Right side rail

rear bar

Trigger Latch

Rear bar

Rear