Dux Platinum 3000 Series Producthandleiding - Pagina 20

Blader online of download pdf Producthandleiding voor {categorie_naam} Dux Platinum 3000 Series. Dux Platinum 3000 Series 20 pagina's. Pressure feed

Body Material

Fluid Passage Material

Air Cap Material

Weight

Maximum Inlet Air Pressure

(To Maintain HVLP Compliance)

Maximum Inlet Fluid Pressure

Air Inlet

Fluid Inlet

Feed Type

Triggering Pressure

Air Consumption

(at stated air cap pressure)

DUX TECHNOLOGIES INC. WARRANTS TO CUSTOMER THAT ALL DUX TECHNOLOGIES INC. PRODUCTS (A) ARE FREE FROM

DEFECTS IN MATERIALS OR WORKMANSHIP AND (B) MEET ALL APPLICABLE DUX TECHNOLOGIES INC. SPECIFICATIONS.

THE FOREGOING WARRANTY WILL REMAIN IN EFFECT FOR ONE YEAR FROM THE DATE OF SALE. IN THE EVENT A PRODUCT

FAILS TO MEET THE FOREGOING WARRANTY, CUSTOMER SHALL NOTIFY DUX TECHNOLOGIES INC. AND REQUEST A RE-

TURN MATERIAL AUTHORIZATION NUMBER (RMA) BEFORE RETURNING THE PRODUCT PURSUANT TO DUX TECHNOLOGIES

INC.'S INSTRUCTIONS. DUX TECHNOLOGIES INC. WILL REPAIR OR REPLACE, AT DUX TECHNOLOGIES INC.'s OPTION, ANY

PRODUCT THAT FAILS TO MEET THE FOREGOING WARRANTY. IF DUX TECHNOLOGIES INC. DETERMINES THAT REPAIR OR

REPLACEMENT IS NOT REASONABLE, DUX TECHNOLOGIES INC. MAY INSTEAD REFUND CUSTOMER'S PURCHASE PRICE FOR

THE NONCONFORMING PRODUCT. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

DUX TECHNOLOGIES INC. NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME ANY OTHER LIABILITIES

IN CONNECTION WITH THE SALE OR USE OF ANY PRODUCT. EXCEPT FOR THOSE WARRANTIES EXPLICITLY DESCRIBED IN

THIS PARAGRAPH, DUX TECHNOLOGIES INC. DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

For customer service call 888.389.2732

Technical Specifications

PLATINUM PRESSURE FEED

Investment Cast Aluminum

Stainless Steel

PTFE Coated Aluminum/

Stainless Steel

14.1 oz

10.7 Psig

75 psi

1/4" NPS Male

3/8" NPS Male

Pressure

39.8oz

A0 @ 10psi- 8.9 scfm

A1 @ 10psi- 10.2 scfm

A2@ 10psi- 11.0 scfm

Page 20