Dux Automatic Producthandleiding - Pagina 12

Blader online of download pdf Producthandleiding voor {categorie_naam} Dux Automatic. Dux Automatic 17 pagina's.

Maintenance

Replacement

1. Inspect the fluid packing adjustment screw

for wear.

2. Place one fluid seal, two o-rings, and the fluid

seal front at the tip of the fluid packing tool

and gently slide the tool into the fluid tube

(See Figure 17). Firmly seat the packing.

3. Next, using the same technique, insert the

brass fluid seal spacer (See Figure 18).

4. Again, using the same technique, place the

second fluid seal and two o-rings into the

fluid tube (See Figure 19).

5. Start the packing adjustment nut into the

body by hand. Tighten the fluid packing nut

until it is flush with its stainless steel housing

(See Figure 20).

6. Lubricate the fluid needle as indicated in

figure 6 and reinstall the trigger housing,

along with the fluid needle and trigger

piston.

7. Replace the fluid tip using the DUX 10mm

fluid tip driver.

NOTE: See page 12 to view order of packing

components.

Figure 17

For customer service call 888.389.2732

(continued)

Brass fluid

seal base

Figure 18

Figure 19

Figure 20

AUTOMATIC

Lubricate fluid

seal and o-rings

before inserting

Page 11