4ms EnvVCA Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 4ms EnvVCA. 4ms EnvVCA 20 pagina's.
Ook voor 4ms EnvVCA: Gebruikershandleiding (12 pagina's)

Pagina afdrukken

Rise and Fall Time Ranges

Switch Position

Slider

Range

(total env.

time)

Slow

5 min. to

Slow

Med

1.5 sec.

Fast

Slow

20 sec. to

Med

18Hz

Fast

Slow

2.5Hz to

Fast

Med

800Hz

Fast

Note that the switch positions have little effect on the range obtained by using CV. This is intentional, to

allow external modules control over the full range.

Because of its analog nature, the maximum and minimum rise and fall times vary from unit to unit. The

table above shows typical values.

The rise and fall times will not necessarily be equal when the sliders are in the same position. For

precisely equal rise and fall times, manual adjustment is usually needed. When applying CV to make

very slow envelopes (greater than 10 minutes), the fall time can be made much slower than the rise

time. Typically the rise time is limited to about five minutes, while the fall time can go up to 20 minutes

or up to an hour on some units.

Max Range

Use Cases

with CV

(total env.

time)

Gradual, slow fades or modulation changes

~30 min. to

occurring over the course of a long time.

300Hz

Generally suited for typical musical tempos. Useful

~9 min. to

for making notes, from snappy percussive sounds to

1kHz

long decays. The slower slider settings approach

LFO ranges.

Good for FM, AM or other audio-rate modulation.

~8 min. to

Snappy attacks and sharp decays.

8kHz

Page